A fender panel is a frame made primarily of steel, which is fixed to the front of a rubber fender to lower the average face pressure. A rubber fender with a panel has the disadvantages of complex design due to the increase in the number of system parts such as the panel, pads and chains; however, it also has several advantages, as listed. With the increase in
the size of vessels, several large fenders have been equipped with fender panels.
(1) The average hull pressure can be adjusted.
(2) The rubber is not in direct contact with the vessel hull.
(3) The system demonstrates satisfactory performance, even in the case of partial contact with projections on the hull.
(4) It is possible to adjust the panel length and number of fenders per panel.
The shape of rubber fenders varies depending on the manufacturer. Several examples are shown in the following pictures.
There are no specific criteria regarding whether a rubber fender should be fitted with fender panels. Panels are often
installed if there is an allowable limit for the hull pressure. The considerations for hull pressure are described. Even if there is no restriction regarding the hull pressure, a fender panel may be required when a large contact area is required, for example, in the case of fenders for ferries
Leave A Reply
Your email address will not be published. Required fiels are marked